If you're new here, you may want to subscribe to my RSS feed. So that you can read the latest updates about Web2.0 tools, Making Money Online, Tips in SEO, Ajax and many more. Thanks for visiting ProgramimiCOM!

There’s DVD+R, DVD+RW, DVD-R, DVD-RW, and even DVD-ROM! So what’s the difference between all of these different names, aren’t all DVDs the same? Well, it’s not quite that simple.

Let’s first start with the most obvious difference: some have R and some have RW. The “R” stands for readable, while the “W” stands for writeable.

The main difference between DVD-R and DVD-RW, or DVD+R and DVD+RW is that the R disc formats can only be written to once, and then it is only readable and can’t be erased for the rest of its digital life. While RW discs are can be written to and erased many times, they are both readable and writeable.

“R” discs are perfect if they are only needed to be written to once, such as giving some files to a friend or transferring them between PCs. “RW” discs have their strength in the ability to be used many times over, which is great for routine system backups, etc. And naturally, the RW discs are slightly more expensive than the R discs, but you’ll have to decide if the trade offs are worth the money.

Now, onto the difference between DVD-R and DVD+R. As I just described above, DVD-R & DVD-RW are sister discs, the difference being one is writeable once, while the other is writeable multiple times. The same thing is true for DVD+R & DVD+RW. So the question is, what’s the difference between the plus and minus?

In order to explain this we must take a trip back in time. When DVDs were first being developed, there was no industry standard. Multiple companies were competing to develop what they hoped would be the dominant form of the future.

The DVD-R DVD+R difference can easily be summarized by the following:

• The DVD-R/RW standard was developed by Pioneer, and is used primarily by Apple and Pioneer. These “minus” discs can only be written to in one layer on the discs surface. In addition, this format is supported by the DVD forum, but is in no way an industry standard. DVD-R/RW discs are cheaper than the “plus” format.
• The DVD+R/RW format is supported by Philips, Dell, Sony, HP, and Mcft. These discs can be written to in multiple layers, giving them slightly better and more disc storage than the “minus” format. Because of this additional capacity, they are slightly more expensive than “minus” discs.

A couple final things to clear up is the difference between DVD-ROM and DVD+RW, or the other DVD formats I mentioned above. The DVD-ROM drive can only read DVDs, while the other DVD drives can read and write data to DVDs.

And naturally the DVD+RW CD+RW difference can be explained by the “DVD” or “CD” prefix. DVDs, on average, can store up to 4.7 GB of data, while a CD can only store about 700 MB of data, or about 15% of a DVD’s capacity. While CDs are slightly cheaper, in my opinion, the benefits of DVDs are much greater.

So now that you’ve learned about the difference between DVD-R, DVD+R, DVD-RW, DVD+RW, and even DVD-ROM, which one is right for you? The easiest way to determine which is more beneficial is to watch the industry trends. A few years ago all pre-built computers were shipping with DVD-ROM drives. Today, most PCs have a burnable DVD drive.

I feel that the benefits of having a burnable DVD drive far outweigh any additional costs. They store much more data, and they are ideal for storing your home movies to watch on your DVD player.

My advice is to look at DVD burners that support all of the major formats I’ve mentioned above, DVD-R, DVD+R, DVD-RW, and DVD+RW. While a DVD drive that supports all of these formats may be slightly more expensive, it will allow you to use any type of DVD disc to burn to, and you’ll be protected from any industry shifts to one format or the other.

• 0 Comments

Normally, if you want to have professional designers custom build your site, you must be prepared to dish out at least a few hundred dollars. All this can change if you know where to find the best deals, the best designs for the lowest price. Here’s a rough guide:

First, you must understand that it is a rip off to get companies to design websites for you. Have you ever seen those advertisements in newspaper classified ad sections that offer a 5-page website at $500? These companies are established companies with physical locations, therefore they have to increase the amount they charge to pay off some overheads: office rent, designer’s wages, advertising costs and so on.

Therefore, it would be wise to find freelance designers who work from home. These people are often working from home so they do not have a high operation cost like that of a company. On the other hand, they will be able to design images with quality similar to those of designers from big companies, so it’s a “no-brainer” choice.

However, choose freelancers with care. The best way to do this would be to go to elance.com. There, you can post the abstract of your project and get thousands of freelancers to bid on your project, so you will surely get the best deal. On top of that, you will be able to choose the designers based on their experience, past transactions and ratings, so your value for money is secured.

Another route you can take is to design your website yourself. Think about it, if you only need 5 simple pages to present some simple information, why waste hundreds of dollars for it? Just spend a little time to sit down and do it yourself. You’ll be able to design your own sites even if you do not know a single line of HTML code with the help of WYSIWYG (what you see is what you get) programs such as Microsoft Frontpage, Macromedia Dreamweaver and so on.

• 0 Comments

What is BFD (Brute Force Detection)?
BFD is a modular shell script for parsing applicable logs and checking for authentication failures. There is not much complexity or detail to BFD yet and likewise it is very straight-forward in its installation, configuration and usage. The reason behind BFD is very simple; the fact there is little to no authentication and brute force auditing programs in the linux community that work in conjunction with a firewall or real-time facility to place bans. BFD is available at: http://www.rfxnetworks.com/bfd.php

This guide will show you how to install and configure BFD to protect your system from brute force hack attempts.

Requirements:
- You MUST have APF Firewall Installed before installing BFD - it works with APF and requires some APF files to operate.
- Root SSH access to your server

Updated: April 13, 2005

Lets begin!
Login to your server through SSH and su to the root user.

1. cd /root/downloads or another temporary folder where you store your files.

2. wget http://www.rfxnetworks.com/downloads/bfd-current.tar.gz

3. tar -xvzf bfd-current.tar.gz

4. cd bfd-0.7

5. Run the install file: ./install.sh
You will receive a message saying it has been installed

.: BFD installed
Install path: /usr/local/bfd
Config path: /usr/local/bfd/conf.bfd
Executable path: /usr/local/sbin/bfd

6. Lets edit the configuration file: pico /usr/local/bfd/conf.bfd

7. Enable brute force hack attempt alerts:
Find: ALERT_USR=”0″ CHANGE TO: ALERT_USR=”1″

Find: EMAIL_USR=”root” CHANGE TO: EMAIL_USR=”your@yourdomain.com”

Save the changes: Ctrl+X then Y

8. Prevent locking yourself out!
pico -w /usr/local/bfd/ignore.hosts and add your own trusted IPs
Eg: 192.168.1.1

Save the changes: Ctrl+X then Y

BFD uses APF’ cli insert feature
and as such will override any allow_hosts.rules entries users have in-place.
So be sure to add your trusted ip addresses to the ignore file to prevent
locking yourself out.

9. Run the program!
/usr/local/sbin/bfd -s

10. Customize your applicatoins brute force configuration
Check out the rules directory in your /usr/local/bfd

Here you’ll find all kinds of pre-made rules for popular services such as Apache, and ProFTPD w00t!
If you have any clue about shell scripting you can customize them or create new rules for enhanced brute force detection and prevent attacks.

Thanks to RFX Networks for creating another great script for the community, Brute Force Detection is excellent!

Cheers

• 0 Comments

What is APF (Advanced Policy Firewall)? APF Firewall
APF is a policy based iptables firewall system designed for ease of use and configuration. It employs a subset of features to satisfy the veteran Linux user and the novice alike. Packaged in tar.gz format and RPM formats, make APF ideal for deployment in many server environments based on Linux. APF is developed and maintained by R-fx Networks: http://www.rfxnetworks.com/apf.php

This guide will show you how to install and configure APF firewall, one of the better known Linux firewalls available.10

Limit SSH connections to one IP with APF in this advanced tutorial

Requirements:
- Root SSH access to your server

Lets begin!
Login to your server through SSH and su to the root user.

1. cd /root/downloads or another temporary folder where you store your files.

2. wget http://www.rfxnetworks.com/downloads/apf-current.tar.gz

3. tar -xvzf apf-current.tar.gz

4. cd apf-0.9.5-1/ or whatever the latest version is.

5. Run the install file: ./install.sh
You will receive a message saying it has been installed

Installing APF 0.9.5-1: Completed.

Installation Details:
Install path: /etc/apf/
Config path: /etc/apf/conf.apf
Executable path: /usr/local/sbin/apf
AntiDos install path: /etc/apf/ad/
AntiDos config path: /etc/apf/ad/conf.antidos
DShield Client Parser: /etc/apf/extras/dshield/

Other Details:
Listening TCP ports: 1,21,22,25,53,80,110,111,143,443,465,993,995,2082,2083,2086,2087,2095,2096,3306
Listening UDP ports: 53,55880
Note: These ports are not auto-configured; they are simply presented for information purposes. You must manually configure all port options.

6. Lets configure the firewall: pico /etc/apf/conf.apf
We will go over the general configuration to get your firewall running. This isn’t a complete detailed guide of every feature the firewall has. Look through the README and the configuration for an explanation of each feature.

We like to use DShield.org’s “block” list of top networks that have exhibited
suspicious activity.
FIND: USE_DS=”0″
CHANGE TO: USE_DS=”1″

7. Configuring Firewall Ports:

Cpanel Servers
We like to use the following on our Cpanel Servers

Common ingress (inbound) ports
# Common ingress (inbound) TCP ports -3000_3500 = passive port range for Pure FTPD
IG_TCP_CPORTS=”21,22,25,53,80,110,143,443,2082,2083, 2086,2087, 2095, 2096,3000_3500″
#
# Common ingress (inbound) UDP ports
IG_UDP_CPORTS=”53″

Common egress (outbound) ports
# Egress filtering [0 = Disabled / 1 = Enabled]
EGF=”1″

# Common egress (outbound) TCP ports
EG_TCP_CPORTS=”21,25,80,443,43,2089″
#
# Common egress (outbound) UDP ports
EG_UDP_CPORTS=”20,21,53″

Ensim Servers
We have found the following can be used on Ensim Servers - although we have not tried these ourselves as I don’t run Ensim boxes.

Common ingress (inbound) ports
# Common ingress (inbound) TCP ports
IG_TCP_CPORTS=”21,22,25,53,80,110,143,443,19638″
#
# Common ingress (inbound) UDP ports
IG_UDP_CPORTS=”53″

Common egress (outbound) ports
# Egress filtering [0 = Disabled / 1 = Enabled]
EGF=”1″

# Common egress (outbound) TCP ports
EG_TCP_CPORTS=”21,25,80,443,43″
#
# Common egress (outbound) UDP ports
EG_UDP_CPORTS=”20,21,53″

Save the changes: Ctrl+X then Y

8. Starting the firewall
/usr/local/sbin/apf -s

Other commands:
usage ./apf [OPTION]
-s|–start ……………………. load firewall policies
-r|–restart ………………….. flush & load firewall
-f|–flush|–stop ……………… flush firewall
-l|–list …………………….. list chain rules
-st|–status ………………….. firewall status
-a HOST CMT|–allow HOST COMMENT … add host (IP/FQDN) to allow_hosts.rules and
immediately load new rule into firewall
-d HOST CMT|–deny HOST COMMENT …. add host (IP/FQDN) to deny_hosts.rules and
immediately load new rule into firewall

9. After everything is fine, change the DEV option
Stop the firewall from automatically clearing itself every 5 minutes from cron.
We recommend changing this back to “0″ after you’ve had a chance to ensure everything is working well and tested the server out.

pico /etc/apf/conf.apf

FIND: DEVM=”1″
CHANGE TO: DEVM=”0″

10. Configure AntiDOS for APF
Relatively new to APF is the new AntiDOS feature which can be found in: /etc/apf/ad
The log file will be located at /var/log/apfados_log so you might want to make note of it and watch it!

pico /etc/apf/ad/conf.antidos

There are various things you might want to fiddle with but I’ll get the ones that will alert you by email.

# [E-Mail Alerts]
Under this heading we have the following:

# Organization name to display on outgoing alert emails
CONAME=”Your Company”
Enter your company information name or server name..

# Send out user defined attack alerts [0=off,1=on]
USR_ALERT=”0″
Change this to 1 to get email alerts

# User for alerts to be mailed to
USR=”your@email.com”
Enter your email address to receive the alerts

Save your changes! Ctrl+X then press Y
Restart the firewall: /usr/local/sbin/apf -r

11. Checking the APF Log

Will show any changes to allow and deny hosts among other things.
tail -f /var/log/apf_log

Example output:
Aug 23 01:25:55 ocean apf(31448): (insert) deny all to/from 185.14.157.123
Aug 23 01:39:43 ocean apf(32172): (insert) allow all to/from 185.14.157.123

12. New - Make APF Start automatically at boot time
To autostart apf on reboot, run this:

chkconfig –level 2345 apf on

To remove it from autostart, run this:

chkconfig –del apf

13. Denying IPs with APF Firewall (Blocking)
Now that you have your shiny new firewall you probably want to block a host right, of course you do! With this new version APF now supports comments as well. There are a few ways you can block an IP, I’ll show you 2 of the easier methods.

A) /etc/apf/apf -d IPHERE COMMENTHERENOSPACES
> The -d flag means DENY the IP address
> IPHERE is the IP address you wish to block
> COMMENTSHERENOSPACES is obvious, add comments to why the IP is being blocked
These rules are loaded right away into the firewall, so they’re instantly active.
Example:

./apf -d 185.14.157.123 TESTING

pico /etc/apf/deny_hosts.rules

Shows the following:

# added 185.14.157.123 on 08/23/05 01:25:55
# TESTING
185.14.157.123

B) pico /etc/apf/deny_hosts.rules

You can then just add a new line and enter the IP you wish to block. Before this becomes active though you’ll need to reload the APF ruleset.

/etc/apf/apf -r

14. Allowing IPs with APF Firewall (Unblocking)

I know I know, you added an IP now you need it removed right away! You need to manually remove IPs that are blocked from deny_hosts.rules.
A)
pico /etc/apf/deny_hosts.rules

Find where the IP is listed and remove the line that has the IP.
After this is done save the file and reload apf to make the new changes active.

/etc/apf/apf -r

B) If the IP isn’t already listed in deny_hosts.rules and you wish to allow it, this method adds the entry to allow_hosts.rules

/etc/apf/apf -a IPHERE COMMENTHERENOSPACES
> The -a flag means ALLOW the IP address
> IPHERE is the IP address you wish to allow
> COMMENTSHERENOSPACES is obvious, add comments to why the IP is being removed These rules are loaded right away into the firewall, so they’re instantly active.
Example:

./apf -a 185.14.157.123 UNBLOCKING

pico /etc/apf/allow_hosts.rules

# added 185.14.157.123 on 08/23/05 01:39:43
# UNBLOCKING
185.14.157.123

Thanks to R-fx networks for developing and maintaining APF Firewall.

• 1 Comment

Masking or anonymizing a Web server involves removing identifying details that intruders could use to detect your OS and Web Port80 Software has developed an IIS server module called ServerMask to combat the majority of issues explored here for the Windows Web Server.

The Server Header Tells All
Most Web servers politely identify themselves and the OS to anyone who asks. Using a network query tool like Sam Spade or this Header Check, you can discern the HTTP Server header. Just request a Web site’s home page and examine the resulting HTTP headers or “banners” sent back by the server. Among them, you will likely find something like this:

Server: Microsoft-IIS/5.0

There is not much mystery here. Apache’s default settings make it no less identifiable:

Server: Apache/2.0.41-dev (UNIX)

You can remove or obscure this HTTP Server header in a variety of ways, depending on your platform. Apache 2.x users who have the mod_headers module loaded can use a simple directive in their httpd.conf file, as follows:
Header set Server “New Server Name Goes Here”

Unfortunately, mod_headers cannot alter the Server header in prior versions of Apache, so 1.3.x users will have to resort to editing the defines in httpd.h and recompiling Apache to get the same result. IIS users can install IISLockDown and use the configuration option in URLScan’s INI file for removing or replacing the header. Be careful with URLScan if you are using Cold Fusion application server — the way the current version replaces the Server header wreaks havoc with CFM pages. In fact, removing the header is the way to go when using URLScan, since if you try replacing the header it moves to the bottom of the header order — which pretty much gives away that you are running URLScan on IIS.

Unsightly File Extensions
Displaying file extensions like .asp or .aspx in a site is a clear indication that you are running a Microsoft server and, in general, hiding file extensions is a good practice to mask the technology generating dynamic pages. You can change your application mappings (.asp becomes .htm or .foo, etc.), but such one-to-one mapping can make mixing server-side technologies painful and does nothing to alleviate headaches during site migrations. Doing without file extensions altogether is an even better idea, not only for security but also for ease-of-migration and content negotiation. Apache people will want to take a look at mod_negotiation. Watch out, though, for the Content-Location header in the server’s response, which can give away the file extension that is not shown in the URL. You might have to suppress this header separately using mod_headers. In a similar vein, Port80 offers a tool called PageXchanger that allows file extension hiding in IIS.

Half-Baked Cookies
The ASP session ID cookie, used by the Session object to maintain client state, is another dead giveaway:

Set-Cookie: ASPSESSIONIDQGQGGWFC=MGMLNKMDENPEOPIJHPOPEPPB;

You can disable ASP Session State so that this cookie is not placed, but you lose the convenience of using the Session object to maintain client state. You could also create an ISAPI filter to change the names of any session ID cookie. On the other hand, ASP sessions are resource intensive, and turning them off improves the performance and scalability of your ASP application, while also helping to anonymize your server.

Send These to the Recycle Bin
WebDAV: Another way of identifying Microsoft servers is their implementation (from Windows 2000 and IIS 5.0 on) of WebDAV — the HTTP Extensions for Distributed Authoring and Versioning. WebDAV itself is not unique to Microsoft or IIS; it is a proposed standard (RFC 2518) with an IETF Working Group. Microsoft’s WebDAV support, however, adds a lot of information to the headers sent back by the server, especially when an HTTP OPTIONS request is made. If you are not using WebDAV (to support Outlook Web Access or Web Folders, etc.), you can disable it entirely by editing the registry or by using IISLockDown and URLScan.

Public Header: Certain Web servers betray their identity by displaying the Public header in HTTP responses. Few popular Web Servers send this header in response to OPTIONS requests (while almost all respond with the similar Allow header). The presence of Public is a good indication you are connected to either an IIS box or Netscape Enterprise 3.6. The Public header can be removed with a custom ISAPI filter (IIS) or NSAPI plug-in (Netscape).

Integrated Windows Authentication: IIS users should not rely on “Integrated Windows Authentication” — especially not as a way of hiding anything on the server. This method betrays the very secret it would keep, since a script or visual hacker can identify the Windows box by means of the WWW-Authenticate headers sent by the server. When a file or directory is protected by NT Challenge-Response authentication, one of the authentication headers contains the string “NTLM” (NT LAN Manager) — a Microsoft-specific form of HTTP authentication.

Get Your Headers Straight
The number and sequence of your HTTP headers and the presence or absence of certain platform-specific headers provide handy ways for more sophisticated hackers to fingerprint your Web server. A relatively unexplored area of server profiling, this will become a more common exploit as administrators start to implement countermeasures against obvious HTTP vulnerabilities like the Server header. For IIS users, a custom ISAPI filter can alter the Microsoft-specific header order or sequence to emulate, say, a default Apache installation. Apache users can accomplish any header order emulation they wish by experimenting with the location and order of Header directives in mod_headers.

Whose Default is That?
Default messages, pages and scripts of all kinds often contain clues to server identity, and these should be removed or modified accordingly. Software behind the Web server often bubbles error messages back through the HTTP request/response cycle, and customized HTTP errors can mask application server, database server, Web server and OS identity. For IIS, CustomError makes it easy for developers to deploy custom 404 and other HTTP error pages. This article shows how to implement custom HTTP errors in Apache. Avoid this on a development server, since, when done properly, it prevents database and server-side scripting errors from being seen — making it tough for developers to debug their applications! Remove or hide any Web or application server administration pages, scripts or documentation installed under your server’s Web root, and make sure to replace those default home pages.

• 1 Comment

Chkrootkit is a powerful tool to scan your Linux server for trojans. We’ll show you how to install it, scan your server and setup a daily automated scanning job that emails you the report.

Installing CHKROOTKIT

SSH as admin to your server. DO NOT use telnet, it should be disabled anyways.

#Change to root
su -

#Type the following
wget ftp://ftp.pangeia.com.br/pub/seg/pac/chkrootkit.tar.gz

# Check the MD5 SUM of the download for security:
ftp://ftp.pangeia.com.br/pub/seg/pac/chkrootkit.md5

md5sum chkrootkit.tar.gz

#Unpack the tarball using the command
tar xvzf chkrootkit.tar.gz

#Change to the directory it created
cd chkrootkit*

#Compile by typing
make sense

#To use chkrootkit, just type the command
./chkrootkit

#Everything it outputs should be ‘not found‘ or ‘not infected‘…

Important Note: If you see ‘Checking `bindshell’… INFECTED (PORTS: 465)’ read on.
I’m running PortSentry/klaxon. What’s wrong with the bindshell test?
If you’re running PortSentry/klaxon or another program that binds itself to unused ports probably chkrootkit will give you a false positive on the bindshell test (ports 114/tcp, 465/tcp, 511/tcp, 1008/tcp, 1524/tcp, 1999/tcp, 3879/tcp, 4369/tcp, 5665/tcp, 10008/tcp, 12321/tcp, 23132/tcp, 27374/tcp, 29364/tcp, 31336/tcp, 31337/tcp, 45454/tcp, 47017/tcp, 47889/tcp, 60001/tcp).

#Now,
cd ..
#Then remove the .gz file
rm chkrootkit.tar.gz

Daily Automated System Scan that emails you a report

While in SSH run the following:
pico /etc/cron.daily/chkrootkit.sh

Insert the following to the new file:
#!/bin/bash
cd /yourinstallpath/chkrootkit-0.42b/
./chkrootkit | mail -s “Daily chkrootkit from Servername” admin@youremail.com

Important:
1. Replace ‘yourinstallpath’ with the actual path to where you unpacked Chkrootkit.
2. Change ‘Servername’ to the server your running so you know where it’s coming from.
3. Change ‘admin@youremail.com’ to your actual email address where the script will mail you.

Now save the file in SSH:
Ctrl+X then type Y

Change the file permissions so we can run it
chmod 755 /etc/cron.daily/chkrootkit.sh

Now if you like you can run a test report manually in SSH to see how it looks.
cd /etc/cron.daily/

./chkrootkit.sh

You’ll now receive a nice email with the report! This will now happen everyday so you don’t have to run it manually.

• 0 Comments

APF firewall can deny ALL connections for ssh and allow only a single or select few of IPs to connect to your server. We’ll guide you through DENY ALL with APF firewall.

PROBLEM:
You want to deny all IPs to connect to shell/ssh on you server but only allow a select one or few to connect with APF firewall.

APF SOLUTION:
1) Login to your server as the root user.

2) cd /etc/apf

3) Use vi or nano to edit the /etc/apf/allow_hosts.rules file
EG: vi /etc/apf/allow_hosts.rules

4) Scroll down until after their last comment with the ##

Add the following in:

tcp:in:d=22:s=YOURHOMEIPHERE
out:d=22:d=YOURHOMEIPHERE

The d=22 part is the port, so you can repeat for other services as well to limit connections if you like.

Save the changes.

5) Edit the /etc/apf/deny_hosts.rules file
EG: vi /etc/apf/deny_hosts.rules

Scroll down until the last default comment ## then below it add the following:

tcp:in:d=22:s=0/0
out:d=22:d=0/0

Save the changes.

6) Restart APF firewall
apf -r

Your server is now only allowing connections to the SSH service from one IP using APF. To add more than one IP repeat the steps in 4) adding a new tcp and out line for each IP.

Cheers

• 1 Comment